Easy methods to set up an M.2 SSD in your PS5: Develop your storage with these easy steps

Step
1

Verify SSD compatibility

Earlier than we get began, you’ll want to verify your SSD is suitable with the PS5. You’ll want an M.2 SSD with a width of as much as 25mm and thickness as much as 11.25 mm. Sony additionally recommends a learn velocity of at the least 5500MB/S.

Most SSD producers will spotlight PS5 compatibility on their web site, so it’s value doing a little analysis beforehand. For this information, we used the Samsung 980 Professional PCIE 4.0 NVMe M.2 SSD.

Step
2

Flip off the PS5

In case your PS5 isn’t already turned off, you’ll be able to shut it down by holding down on the facility button on the entrance. Unplugging a PS5 in standby mode will trigger the console to show an offended message upon reboot. 

Step
3

Unplug energy and HDMI cable

As soon as the PS5 has powered down, you’ll be able to unplug each the HDMI and energy cables on the rear. 

Step
4

Place PS5 on flat floor with brand going through down

Discover a flat floor to put the PS5 on. The emblem needs to be going through down, whereas the rear ports (HDMI and many others) needs to be going through in direction of you, and disk drive and energy button going through away. 

Step
5

Pull the faceplate as much as detach

Maintain the bottom-right nook of the PS5’s faceplate, in addition to the top-left nook, after which gently pull up. After you hear a ‘click on’ the faceplate ought to come away to disclose the internals. 

Step
6

Take away screw from white rectangular panel

On the furthest fringe of the PS5, you must see a white rectangular panel. Take away its screw with a Phillips screwdriver. 

Step
7

Take away panel to disclose the SSD enlargement slot

As soon as the screw has been eliminated, you’ll be capable of raise the white panel to disclose the SSD enlargement slot. 

Step
8

Take away the screw and spacer on right-hand facet

On the right-hand facet of the enlargement slot, you must see a lone screw. Unscrew it to take away each the screw itself and a spacer (a small steel ring). 

Step
9

Slot your SSD (with hooked up heatsink) into the left-hand port

On the left facet of the enlargement slot, you must discover a connection port. Your M.2 SSD needs to be slotted into right here, with its prime facet going through up. You’ll hear a clicking sound as soon as it’s mounted into place.

Step
10

Repair the SSD to the spacer and screw to lock it into place

Use the screw and spacer to repair the precise facet of your SSD down onto the PS5 so it’s now not angled up within the air. Give the SSD a bit of wiggle to verify it’s securely in place. 

Step
11

Rescrew the white panel into place

With the SSD put in, now you can put the white panel again into place, securing it with the screw you beforehand eliminated.

Step
12

Slide the PS5 faceplate again into place

This is usually a little fiddly to do. Set it onto your PS5, about 2cm to the left, after which slide into place. Be sure that the faceplate is secured in place earlier than persevering with. 

Step
13

Reconnect the PS5 to energy and HDMI cables

Now you can reconnect your PS5 to your energy and HDMI cables. Additionally ensure to refasten the PS5 to its stand if in a horizontal place. 

Step
14

Flip your PS5 on

Press the facility button on the entrance in addition up the PS5. 

Step
15

Format your newly put in SSD

If the SSD set up was profitable, you’ll be greeted by a window asking you to format the SSD. It will wipe all cupboard space presently discovered on the SSD, so be sure you haven’t acquired any necessary information in the event you’ve beforehand used it for a PC. The formatting ought to solely take just a few seconds.

Step
16

Press OK

As soon as accomplished, you’ll be able to press OK on the subsequent couple of home windows, which can notify you of the learn velocity of your SSD and clarify that you could switch put in video games and save information to the SSD by way of settings > storage > put in location.